Flour Medicine Coffee Powder Ribbon Blender Mixing Mixer Machine Manufacturer, Find Blender Mixing Mixer Machine Factory in Jiangyin Wanda Pharmaceutical Machinery Co., Ltd.

Flour Medicine Coffee Powder Ribbon Blender Mixing Mixer Machine Manufacturer

The ribbon mixer is generally used for the mixing of viscous or cohesive powders and granules, and the mixing of liquid and paste materials in the powder and granules. At the same time, due to the difficulty of cleaning the viscous materials, it is suitable for large volume production and infrequent replacement of varieties. Mixed occasions.

Working principle

The ribbon mixer consists of a U-shaped container, a ribbon agitating blade, and a transmission component; the U-shaped long body cylinder structure ensures a small resistance movement of the mixed material (powder, semi-fluid) in the cylinder. The forward and reverse rotating screws are mounted on the same horizontal axis to form alow-dynamic and high-efficiency mixed environment. The ribbon-shaped lades are generally made of two or three layers, and the outer spiral gathers the materials from the sides to the center, and the inner spiral will The material is transported from the center to the sides, allowing the material to form more eddy currents in the flow. 

Scope of application

      The horizontal ribbon mixer is suitable for the mixing of powder and powder, granules and powder, powder and a small amount of liquid. It is widely used in chemical, pharmaceutical, food, feed, plastic, and building materials industries, and can be produced according to GMP standards. The machine has wide adaptability to the mixture, can evenly mix the viscous materials and can keep the granules intact as much as possible, and the materials with the difference of the ratio of 1:1000-10000can be well mixed.

Equipment advantage

      1. Ribbon mixer is of wide range applications in different fields. It applies to various materials and particle sizes with high homogeneity.

      2. A ribbon mixer is highly efficient within a short time. For different raw materials and particle sizes, the homogeneity is very high.

      3. For viscous or cohesive materials, the ribbon mixer performs much better than other horizontal mixers.

      4. The minimal gap between ribbon and vessel ensures mixing efficiency and minimal dead spots.

      5. The performance of the packing seal and air purge seal for the main shaft seal is airtight. Packing glands are made of waterproof PTFE which is abrasion-resistant and guarantees a long life in service.

      6. The ribbon mixer is easy to clean through the clean-out door or top lid.

      7. During mixing and homogeneity is high, Ribbon Mixers add >15% liquid additive by spray nozzles.

      8. The jacket of different types such as a steam jacket, dimpled jacket, electric heating bars jacket, water jacket, heat transfer oil jacket, are widely used for different applications.

      9. Discharges including a flap valve, slide gate valve, ball valve, and butterfly valve are optional for different solutions. Different controls like manual, pneumatic, and electric drives are also available.

      10. Vacuum or air inflation is also applicable for some special purposes.

      11. Ribbons can be changed into blades or non-continuous as the case may be for different raw materials or purposes.12. High-speed choppers are optional.

      13. The vessel fabrication is stable, robust and easy to install and maintain. The whole mixing process is reliable which results in low maintenance and low wear.

What’s more, All suppliers on Hifactory.com are All Verified Manufacturers! Covering China machinery factory, minerals & metallurgy, rubber & plastics, clothing & shoes, chemical materials, consumer electronics, hardware and so on. Sign Up Free now to contact those manufacturers!